1)Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by presing <--- ---="" or=""> then OK
3) Enter CMY ink level by pressing <--- ---="" or=""> then OK
4) Select 1 by presing <--- ---="" or=""> then OK
5) Enter K ink level by presing ---> then OK
6) select 1 by presing <--- ---="" or=""> then OK
7) Press reset ( design: // )
-
PANASONIC TV BLINK CODES FOR REPAIR. The number of flashes is an error code. Count the number o... -
The physical installation of the so-called hard disk drive physical installation, referring to the hard disk loaded into the chassis, set t...
