How to Reset a C448 Error Code on a Toshiba e-STUDIO 3510c.
Hardware:
• Toshiba e-STUDIO 3510c color copier
Every so often we get a fuser jam error code C448 on our Toshiba e-STUDIO 35010c copier. Once you clear out the paper it is easy to clear the error so you can go back to copying
Step 1: Remove all the paper that is jammed in the machine. Follow the steps on the touch screen to locate the jammed paper.
Toshiba E-Studio Copier machines Error Codes
Toshiba E-Studio machines do not display service code automatically. To read a code you should press down the “8” key and the “Clear/Stop” key at the same time. All codes, except fuser errors are reset by turning the machine off and back on again. PM cycle counter can be set in 0,8 mode, turn on the machine while holding down “0” and 8” keys, enter 251 to set PM limit, and 252 to see the number of copies that have been run since the last PM.
Toshiba Error Codes: C130
1st Drawer Motor
C140
2nd Drawer Motor.
C150
3rd Drawer Motor.
Toshiba Error Codes: C130
1st Drawer Motor
C140
2nd Drawer Motor.
C150
3rd Drawer Motor.
Subscribe to:
Posts (Atom)
SOLUTION FOR TOSHIBA E STUDIO COPIER 3510C ERROR CODE C448.
How to Reset a C448 Error Code on a Toshiba e-STUDIO 3510c.
Hardware:
• Toshiba e-STUDIO 3510c color copier
Every so often we get a fuser jam error code C448 on our Toshiba e-STUDIO 35010c copier. Once you clear out the paper it is easy to clear the error so you can go back to copying
Step 1: Remove all the paper that is jammed in the machine. Follow the steps on the touch screen to locate the jammed paper.
Hardware:
• Toshiba e-STUDIO 3510c color copier
Every so often we get a fuser jam error code C448 on our Toshiba e-STUDIO 35010c copier. Once you clear out the paper it is easy to clear the error so you can go back to copying
Step 1: Remove all the paper that is jammed in the machine. Follow the steps on the touch screen to locate the jammed paper.
Toshiba E-Studio Copier machines Error Codes
Toshiba E-Studio machines do not display service code automatically. To read a code you should press down the “8” key and the “Clear/Stop” key at the same time. All codes, except fuser errors are reset by turning the machine off and back on again. PM cycle counter can be set in 0,8 mode, turn on the machine while holding down “0” and 8” keys, enter 251 to set PM limit, and 252 to see the number of copies that have been run since the last PM.
Toshiba Error Codes: C130
1st Drawer Motor
C140
2nd Drawer Motor.
C150
3rd Drawer Motor.
Toshiba Error Codes: C130
1st Drawer Motor
C140
2nd Drawer Motor.
C150
3rd Drawer Motor.
Subscribe to:
Posts (Atom)
-
PANASONIC TV BLINK CODES FOR REPAIR. The number of flashes is an error code. Count the number o...
-
The physical installation of the so-called hard disk drive physical installation, referring to the hard disk loaded into the chassis, set t...